MotoBags Rack Fitment
The MotoBags Quick Release System can be easily adjusted to fit most tubular-shaped pannier racks on the market. Here's a detailed guide to quickly see which pannier racks are compatible.
✅ = Fully compatible with our Quick Release System
⚠️ = Compatible after simple adaptations
❌ = Not compatible with our Quick Release System
Select your motorcycle:
- BMW
- R1300GS
- R1200/1250GS / Adventure (Liquid Cooled)
- R1200GS / Adventure (Oil cooled)
- F900GS / Adventure
- F850GS / Adventure
- F750GS
- F800GS
- F800GS Adventure
-
F700GS
- Ducati
- Harley-Davidson
- Honda
- Husqvarna
- KTM
- 1290 Super Adventure S / R
- 790 / 890 Adventure / R
- 1190 Adventure / R
- 1090 Adventure R
- 1050 Adventure
- 950 / 990 Adventure
- Royal Enfield
- Suzuki
- Triumph
- Yamaha
How to adjust the Quick Release System
For exploded views and detailed illustrations, see our manual:
👉 MotoBags Quick Release System Manual
General Rack Fitment Information
The MotoBags Quick Release System can be easily adjusted to fit most racks on the market, and it works best on 18mm tubular racks that have no protruding elements.
The Locking Latch needs a minimum clearance of 13cm on the rack to be able to close as illustrated in the photo below. The Locking Latch can be relocated and the Quick Release System can be adjusted to fit different size racks, which is highly recommended for an optimal fit.
Compatible Rack Dimensions
- Minimum Inner Rack Height: ≤ 180mm/7.08”
- Minimum Inner Rack Width: ≤ 209mm/8.22”
- Maximum Inner Rack Height: ≥ 230mm/9.05”
- Maximum Inner Rack Width: ≥ 380mm/14.96”
❌ Incompatible racks
The following 3rd party rack designs CAN NOT be used together with our MotoBags, regardless of Quick Release System or Fixed Attachment System.
SW-Motech SLC
❌ Do NOT fit our Quick Release System
❌ Do NOT fit our Fixed Attachment System
Shad 3P System Side Case Racks
❌ Do NOT fit our Quick Release System
❌ Do NOT fit our Fixed Attachment System
Hepco & Becker C-Bow Racks
❌ Do NOT fit our Quick Release System
❌ Do NOT fit our Fixed Attachment System
GIVI Monokey racks
❌ Do NOT fit our Quick Release System
❌ Do NOT fit our Fixed Attachment System
⚠️ Pay attention with the following racks:
GIVI Outback Trekker racks
❌ Do generally NOT fit our Quick Release System
✅ Fits our Fixed Attachment System when clamps and pins are removed
Hepco & Becker racks
❌ Do generally NOT fit our Quick Release System
✅ Fits our Fixed Attachment System
SW Motech PRO Carrier racks
❌ Do NOT fit our Quick Release System
✅ Fits our Fixed Attachment System (drilling needed)
SW Motech EVO Carrier racks
❌ Do NOT fit our Quick Release System
✅ Fits our Fixed Attachment System
Shad 4P System Side Case Racks
❌ Do NOT fit our Quick Release System
✅ Fits our Fixed Attachment System
BUMOT Pannier Racks
❌ Do NOT fit our Quick Release System
✅ Fits our Fixed Attachment System
Outback Motortek racks
- X-Frame
- 2018 Africa Twin Adventure Sports (OBM-CRF1000-STPR-18-BL)
❌ Do NOT fit our Quick Release System
✅ Fits our Fixed Attachment System
GIVI PL189
❌ Do NOT fit our Quick Release System
✅ Fits our Fixed Attachment System, if top clamp and lower pins are removed
BMW 650GS Sertao OEM Racks
⚠️ Not tested with our Quick Release System = No guaranteed fit
On visual inspection fitment could be possible but not confirmed. Adjustments will be needed and closing mechanism needs to be placed to the left or right of the centre rack brace. Drilling fixed holes into the back plate might be needed.
✅ Fits our Fixed Attachment System
Rack not listed? Please fill out this form and then contact us.
Fixed Mounting System
We always include the original Fixed Puck System with all MotoBags!
The information below is only valid when using the fixed attachment system method to attach the MotoBags to racks.
How to convert your MotoBags from QRS to the Fixed Mounting System
PDF: Installation Instructions for Fixed attachment of the MotoBags