The MotoCAN® is designed to be directly connected to your motorcycle, interfacing with its CAN-bus system. This offers an incredibly adaptable and effortless plug-and-play solution for incorporating additional components to your bike including Motorcycle Lights.
This eliminates the necessity of wire cutting, which could potentially invalidate your warranty. With the MotoCAN, you gain the ability to securely oversee your accessories, personalize your motorcycle, and enhance its safety for a smoother riding experience.
Lone Rider MotoCAN can power and control Motorcycle Lights and other motorcycle accessories. Upgrade to control lights and other accessories automatically and directly from the bikes button clusters
MotoCAN is a Plug-in-Play solution to seamlessly control:
- Motorcycle Lights
- LIN Smart Lights
- Auxiliary Lights
- Brake Lights
- Air Horns
- GPS Navigation
- Dash Cams
- Heated Gear
- Air Compressor
- USB Chargers
- And other accessories
MotoCAN stands out from other CANBUS devices as has been programmed to get the full range of Motorcycle Lights features and functions. These extended features and functions are compatible with MotoCAN and Motorcycle Lights.
KEY FEATURES
- One device controls all functions
- Unified system management
- Adds enhanced safety features
- Maintains manufacturer warranty
- Connects directly to the CAN-Bus
- Discreet design – fits seamlessly under the seat
- Simple software setup via USB
- Four independently fused electronic channels
- Waterproof and dust-resistant
- Motorcycle Lights Compatible
- LIN compatible
- 4x 10A outputs (25A, max 20s)
- Self-resettable electronic fuses
- 3-wire brightness control
DOWNLOAD SOFTWARE
https://www.lonerider-motorcycle.com/motocan-software
COMPATIBILITY LIST
https://www.lonerider-motorcycle.com/pages/motocan-compatibility
WHATS IN THE BOX?
- 1x Bike specific MotoCAN
- 3x MT 3-Pin Blanking Plugs (to attach other accessories)
- 1x Micro USB Dust Cover
- 3x MT 3-Pin Male Connector Stub Set
- 3x MT 3-Pin Rubber Plugs
- 20x Zip Ties
- 1x USB-USB micro Cable
The MotoCAN is required to use and customize all Moto Light features. It is recommended that the Motorcycle Lights be exclusively used with MotoCAN. To know what MotoCAN you need for your specific bike, use the VIN decoder.
Please note: If you can't find your bike model under "Variant" above, you can order the Hex Innovate Gen II ezCAN to be used with your Motorcycle Lights until we have a MotoCAN available for your bike. In this case, order the variant "Motorcycle Lights set (2 pods) | No MotoCAN".
Compatible CANbus system:
- Lone Rider MotoCAN
- HEX ezCAN Gen2 (post V2408 software version)
NOT compatible with :
- Any other CANbus system
- DENALI CANsmart
- DENALI DialDim
- Clearwater CANopener
TECHNICAL FEATURES
| MotoCAN Hardware specifications | |
| Voltage supply | 6V to 18V |
| System fuse rating | 30A, automotive mini blade fuse |
| Maximum continuous current | 30A (25A recommended) |
| Current consumption (operating) | 25mA (typical) |
| Current consumption (sleep) | 750µA (typical) 1mA (max) |
| Number of output circuits | Four, each with switched 12V power, Ground and PWM/data brightness control wire |
| Output circuit current | 10A per circuit (continuous) 25A (max) for 25 seconds |
| Output circuit fusing | Electronic fuses, configurable from 1A to 25A |
| Output circuit 3rd wire (PWM/data control) | 40mA (short circuit current) |
| Measurement ranges: Output current CAN-bus voltage Horn input Switch input |
0 to 72A 0 to 22V 0 to 22V 0 to 3.3V |
| Internal thermal protection | 90ºC maximum internal temperature |
| Transient protection | As per UN ECE Regulation 10 (Revision 5) |
| CAN connectivity | 1x CAN 2.0B |
| USB connectivity | USB V2.0 full speed, micro B-type connector |
| LIN connectivity | Configurable LIN master (White power circuit) |
| Water and dust protection | Sealed unit. Waterproof USB connector with dust cover and sealed connectors |